language/teachpacks/io-utilities.scm
;;===== Module: io-utilities ===================================================
;;
;; Defining
;;   string-list->file        write file
;;   file->string             read file
;;   rat->str                 convert rational number to string
;;   str->rat                 convert string to rational number
;;   loc                      report LoC for specified file
;;
;; (string-list->file file-path list-of-strings state)
;;    Produces effect of writing strings to specified file, in sequence
;;    with newline-characters added at the end of each string
;;    Note: Directory separator in file-path string must be "/", not "\"
;;    Note: "Example functions" section shows how to use this function
;;          See: (wfoo state), (rwfoobar state)
;;    Note: Returns multiple value containing error status and state
;;
;; (file->string file-path state)
;;    delivers (mv string state) where string contains all characters in file
;;    Note: Directory separator in file-path string must be "/", not "\"
;;    Note: "Example functions" section shows how to use this function
;;          See: (rfoo state), (rwfoobar state)
;;    Note: Returns multiple value containing characters from file as
;;          string, error status, and state
;;    Warning! Virtual memory might be exhausted by reading really big files
;;
;; (rat->str r d)
;;     delivers string containing decimal representation of a rational
;;     number, r, with d decimal places digits following the decimal point
;;
;; (str->rat str)
;;    delivers rational number represented by str, a string of decimal digits,
;;    possibly containing a decimal point, and possibly with a leading +/- sign
;;
;; (loc file-path state)
;;    Reports number of lines of code in file specified by file-path (a string)
;;    Also reports state, which is annoying
;;==============================================================================

;;===== Usage Note =============================================================
;; Place this file in the following directory
;;    C:/Program Files/ACL2-2.9.2/sources/books/SE/
;;
;; Use the following command to certify the module
;;   (certify-book "C:/progra~1/ACL2-2.9.2/sources/books/SE/io-utilities")
;;
;; Warning! This book imports list-utilities
;;          Make sure a certified list-utilities book is in the books/SE folder
;;
;; Commands to get access to module functions
;;    Note: set-state-ok and include-book may be embedded in books
;;          :comp read-n-chars may be issued from session only, not from book
;;    (include-book "C:/progra~1/ACL2-2.9.2/sources/books/SE/io-utilities")
;;    (set-state-ok t)
;;    :comp read-n-chars       ; Warning! Issue these :comp commands in
;;    :comp write-all-strings  ;          ACL2 session only, not in book
;;==============================================================================
#ci
(module io-utilities (file "../teachpack-dracula.scm")
  ;;===== Environment setup ======================================================
  (require (prefix s: "io-utilities-scheme.scm")
           (lib "unit.ss")
           (file "list-utilities.scm"))
  
  (provide io-utilities@ io-utilities^)
  
  (define-signature io-utilities^
    [file->string string-list->file rat->str str->rat loc])
  
  (define-unit LU->IU@
    (import list-utilities^)
    (export io-utilities^)
    
    (defun file->string (fname state) (s:file->string fname state))
    (defun string-list->file (fname strlist state)
      (s:string-list->file fname strlist state))
    
    (set-state-ok t)
    ;;==============================================================================
    
    ;;===== Function: (dgt->chr dgt) ===============================================
    ;;
    ;;  Converts integer in 0-9 range to digit-character
    ;;
    ;;  Pre : (member-equal dgt '(0 1 2 3 4 5 6 7 8 9))
    ;;  Post: (member-equal (dgt->chr dgt)
    ;;                      '(#\0 #\1 #\2 #\3 #\4 #\5 #\6 #\7 #\8 #\9)
    ;;  Note: defaults to #\0 if dgt is not a one-digit, nonnegative integer
    ;;==============================================================================
    (defun dgt->chr (dgt)
      (cond ((equal dgt 0) #\0)
            ((equal dgt 1) #\1)
            ((equal dgt 2) #\2)
            ((equal dgt 3) #\3)
            ((equal dgt 4) #\4)
            ((equal dgt 5) #\5)
            ((equal dgt 6) #\6)
            ((equal dgt 7) #\7)
            ((equal dgt 8) #\8)
            ((equal dgt 9) #\9)
            (t             #\0)))
    
    ;;====== Function: (dgts->chrs dgts) ===========================================
    ;;
    ;;  Converts every digit in a list to the corresponding character
    ;;
    ;;  Pre : (and (integer-listp dgts)
    ;;             (implies (and (integerp d) (member d dgts))
    ;;                      (member d '(0 1 2 3 4 5 6 7 8 9)))
    ;;  Post: (implies (and (characterp c) (member c (dgts->char dgts)))
    ;;                 (member c (#\0 #\1 #\2 #\3 #\4 #\5 #\6 #\7 #\8 #\9)))             
    ;;==============================================================================
    (defun dgts->chrs (dgts)
      (if (not (consp dgts))
          nil
          (cons (dgt->chr (car dgts))
                (dgts->chrs (cdr dgts)))))
    
    ;;===== Function: (chr->dgt dgt-chr) ===========================================
    ;;
    ;;  Converts a digit-character to the corresponding one-digit integer
    ;;
    ;;  Pre : (member-equal dgt-chr '(#\0 #\1 #\2 #\3 #\4 #\5 #\6 #\7 #\8 #\9))
    ;;  Post: (member (char->dgt dgt-chr) '(0 1 2 3 4 5 6 7 8 9))
    ;;  Note: defaults to 0 if dgt-chr is not a digit character
    ;;==============================================================================
    (defun chr->dgt (chr)
      (cond ((equal chr #\0) 0)
            ((equal chr #\1) 1)
            ((equal chr #\2) 2)
            ((equal chr #\3) 3)
            ((equal chr #\4) 4)
            ((equal chr #\5) 5)
            ((equal chr #\6) 6)
            ((equal chr #\7) 7)
            ((equal chr #\8) 8)
            ((equal chr #\9) 9)
            (t               0)))
    
    ;;====== Function: (chrs->dgts chrs) ===========================================
    ;;
    ;;  Converts every digit in a list to the corresponding character
    ;;
    ;;  Pre : (and (character-listp chrs)
    ;;             (implies (and (characterp c) (member c chrs))
    ;;                      (member c '(#\0 #\1 #\2 #\3 #\4 #\5 #\6 #\7 #\8 #\9))
    ;;  Post: (implies (and (integerp d) (member d (chrs->dgts chrs)))
    ;;                 (member d '(0 1 2 3 4 5 6 7 8 9)))             
    ;;==============================================================================
    (defun chrs->dgts (chrs)
      (if (not (consp chrs))
          nil
          (cons (chr->dgt (car chrs))
                (chrs->dgts (cdr chrs)))))
    
    ;;===== Function: (horner s x coefficients) ====================================
    ;;
    ;;  Computes s*(x^n) + polynomial in x with given coefficients
    ;;    where n = (length coefficients)
    ;;  Note: Coefficient list ordering is high-order to low-order
    ;;        That is, (nth k coefficients) is coefficient of x^(n - k - 1)
    ;;        where n = (length coefficients) - 1, k = 0, 1, ... n-1
    ;;
    ;;  Pre : (and (numberp s) (numberp x) (number-listp coefficients))
    ;;  Post: (integerp (horner s x coefficients))
    ;;==============================================================================
    (defun horner (accumulator x coefficients )
      (if (not (consp coefficients))
          accumulator
          (horner (+ (car coefficients) (* x  accumulator))
                  x
                  (cdr coefficients))))
    
    ;;===== Function: (dgts->int dgts) =============================================
    ;;
    ;;  Delivers integer whose decimal digits comprise dgts (high-order to low-order)
    ;;
    ;;  Pre : (implies (member-equal d dgts)
    ;;                 (member-equal d '(0 1 2 3 4 5 6 7 8 9)))
    ;;  Post: (and (integerp (dgts->int dgts))
    ;;             (>= (dgts->int dgts) 0))
    ;;==============================================================================
    (defun dgts->int (dgts)
      (horner 0 10 dgts))
    
    ;;===== Function: (int->append-dgts n dgts) ====================================
    ;;
    ;;  Append dgts to digits of decimal representation of n
    ;;
    ;;  Pre:  (and (integerp n) (>= n 0)
    ;;             (implies (member-equal d dgts)
    ;;                      (member-equal d '(0 1 2 3 4 5 6 7 8 9))))
    ;;  Post: (equal (dgts->int (int->append-dgts n nil))
    ;;               n)
    ;;==============================================================================
    (defun int->append-dgts (n dgts)
      (if (or (not (integerp n))
              (not (> n 0)))
          dgts
          (int->append-dgts (floor n 10) (cons (mod n 10) dgts))))
    
    ;;===== Function: (int->dgts n) ================================================
    ;;
    ;;  Deliver digits of decimal representation of n
    ;;
    ;;  Pre:  (and (integerp n) (>= n 0))
    ;;  Post: (equal (dgts->int (int->dgts n))
    ;;               n)
    ;;==============================================================================
    (defun int->dgts (n)
      (int->append-dgts n nil))
    
    ;;===== Function: (str->int str) ===============================================
    ;;
    ;;  Returns integer represented by string
    ;;
    ;;  Pre:  (implies (member-equal chr (str->chrs str))
    ;;                 (member-equal chr '(#\0 #\1 #\2 ... #\9)))
    ;;  Post: (str->int str) is the integer specifed, in decimal notation, in str
    ;;==============================================================================
    (defun str->int (str)
      (dgts->int (chrs->dgts (str->chrs str))))
    
    ;;===== Function: (int->str n) =================================================
    ;;
    ;;  Returns string containing decimal representation of n
    ;;
    ;;  Pre:  (and (integerp n)
    ;;             (>= n 0))
    ;;  Post: (equal (str->int (int->str n))
    ;;               n)
    ;;==============================================================================
    (defun int->str (n)
      (chrs->str (dgts->chrs (int->dgts n))))
    
    ;;===== Function: (str->rat str) ===============================================
    ;;
    ;;  Returns number whose decimal representation is str
    ;;
    ;;  Pre:  (and (implies (member chr (str->chrs str))
    ;;                      (or (member chr '(#\0 #\1 #\2 ... #\9))
    ;;                          (equal chr #\+)
    ;;                          (equal chr #\-)
    ;;                          (equal chr #\.))
    ;;             (not (member #\+ (drop-past #\+ (str->chrs str))))
    ;;             (not (member #\- (drop-past #\+ (str->chrs str))))
    ;;             (not (member #\- (drop-past #\- (str->chrs str))))
    ;;             (not (member #\+ (drop-past #\- (str->chrs str)))))
    ;;  Post: (and (rationalp (str->rat str))
    ;;             (= (str->rat str)
    ;;                (str->rat (rat->str (str->rat str) (length str)))))
    ;;  Note: (equal (str->rat nil) 0)
    ;;  Note: Defaults to zero if str does not meet expectations
    ;;==============================================================================
    (defun str->rat (str)
      (if (or (not (stringp str))
              (string-equal str ""))
          0
          (let* ((chrs (str->chrs str))
                 (maybe-sign (car chrs))
                 (sans-sign (if (member maybe-sign '(#\+ #\-))
                                (cdr chrs)
                                chrs))
                 (parts (break-at #\. sans-sign))
                 (int-part (car parts))
                 (frc-part (cdr (cadr parts)))
                 (int-dgts (chrs->dgts int-part))
                 (frc-dgts (chrs->dgts frc-part))
                 (r-magnitude  (+ (dgts->int int-dgts)
                                  (/ (dgts->int frc-dgts)
                                     (expt 10 (length frc-dgts))))))
            (if (char-equal maybe-sign #\-)
                (- r-magnitude)
                r-magnitude))))
    
    ;;===== Function: (rat->str r d) ===========================================
    ;;
    ;;  Returns string containing decimal representation of r, to d decimal places
    ;;
    ;;  Pre:  (and (rationalp r)
    ;;             (integerp d)
    ;;             (>= d 0))
    ;;  Post: (<= (abs(- (str->rat (rat->str r d))
    ;;                    r))
    ;;            (/ 5 (expt 10 (+ d 1))))
    ;;  Note: Defaults to "0" if parameters fail to meet expectations
    ;;==============================================================================
    (defun rat->str (r d)
      (if (or (not (rationalp r))
              (= r 0)
              (not (integerp d))
              (< d 0))
          "0"
          (let* ((r-shifted (round (* (abs r) (expt 10 d)) 1))
                 (r-chrs (dgts->chrs (int->dgts r-shifted)))
                 (n (length r-chrs))
                 (num-dgts-before-decimal-pt (max 0 (- n d)))
                 (minus-sign-if-needed (if (< r 0) '(#\-) nil)) 
                 (parts (break-at-nth num-dgts-before-decimal-pt r-chrs))
                 (int-part (car parts))
                 (decimal-pt-if-needed (if (> d 0) '(#\.) nil))
                 (frc-part (cadr parts)))
            (chrs->str (append minus-sign-if-needed
                               int-part
                               decimal-pt-if-needed
                               (pad-left d #\0 frc-part))))))
    
    ;;===== (read-n-chars n li channel state) ======================================
    ;;
    ;;  Inserts up to n characters from channel into li, leaving the new characters
    ;;  at the beginning of li in the reverse of the order in they were received in
    ;;
    ;;  Pre : (and (integerp n)
    ;;             (>= n 0)
    ;;             (character-listp li)
    ;;             (character-input-channelp channel))
    ;;  Post: Up to n characters have been received from channel
    ;;        Returns multiple value containing list of chars, channel, and state
    ;;==============================================================================
    (defun read-n-chars (n li channel state)
      (if (or (not (integerp n)) (<= n 0))
          (mv li channel state)
          (mv-let (chr state) (read-char$ channel state)
                  (if (null chr)
                      (mv li channel state)
                      (read-n-chars (- n 1) (cons chr li) channel state)))))
    
    ;;===== (write-all-strings strli channel state) ================================
    ;;
    ;;  Writes characters from each string in strli to channel
    ;;  (inserting a newline after the characters comprising each element of strli)
    ;;
    ;;  Pre : (and (string-listp strli)
    ;;             (character-input-channelp channel))
    ;;  Post: channel has received chars from strings in strli, plus newlines
    ;;        Returns multiple value containing channel and new state
    ;;==============================================================================
    (defun write-all-strings (strli channel state)
      (if (endp strli)
          (mv channel state)
          (let ((state (princ$ (string-append (car strli)
                                              (coerce '(#\newline) 'STRING)) 
                               channel 
                               state)))
            (write-all-strings (cdr strli) channel state))))
    
    ;;===== (file->string file-path state) =========================================
    ;;
    ;;  Makes character sequence comprising file accessible as string
    ;;
    ;;  Pre : (character-listp file-path)
    ;;  Post: Characters in file become accessible as string portion
    ;;          of returned multiple value
    ;;        Returns multiple value:
    ;;          (1) string comprising first million characters from file
    ;;          (2) status (nil indicates success)
    ;;          (3) state
    ;;  Warning! System may run out of virtual memory when reading large files
    ;;  Warning! This function will not read files exceeding about 4GB
    ;;==============================================================================
    #;(defun file->string (fname state)
        (mv-let (chli error state)
                (mv-let (channel state) (open-input-channel fname :character state)
                        (if (null channel)
                            (mv nil
                                (string-append "Error while opening file for input: "
                                               fname)
                                state)
                            (mv-let (chlist chnl state)
                                    (read-n-chars 4000000000 '() channel state)
                                    (let ((state (close-input-channel chnl state)))
                                      (mv chlist nil state)))))
                (mv (reverse (chrs->str chli)) error state)))
    
    ;;===== (string-list->file list-of-strings file-path state) ====================
    ;;
    ;;  Writes strings to specified file, in sequence, and with
    ;;  newline characters added at the end of each string
    ;;
    ;;  Pre:  (and (string-listp list-of-strings)
    ;;             (character-listp file-path))
    ;;  Post: Designated file contains characters from list-of-strings
    ;;          with newline characters inserted
    ;;        Returns multiple value:
    ;;          (1) status (nil indicates success)
    ;;          (2) state
    ;;==============================================================================
    #;(defun string-list->file (fname strli state)
        (mv-let (channel state)
                (open-output-channel fname :character state)
                (if (null channel)
                    (mv (string-append "Error while opening file for output: " fname)
                        state)
                    (mv-let (channel state)
                            (write-all-strings strli channel state)
                            (let ((state (close-output-channel channel state)))
                              (mv nil state))))))
    
    ;;===== (loc file-path state) ==================================================
    ;;
    ;;  Reports number of lines of code in file specified by file-path (a string)
    ;;  Also reports state, which is annoying
    ;;
    ;; Note: Lines consisting entirely of commentary or whitespace
    ;;       are not counted as lines of code
    ;; Warning! Unix-style path names required ("dir/nam", not "dir\nam")
    ;; WARNING! The input file must use Unix-style line-terminators.
    ;;          If you created the file using Notepad or Wordpad,
    ;;          you must convert it to Unix style, which you can do like this:
    ;;             dos2unix "some-program.lisp"
    ;;          Of course, you'll need to convet the file back to Windows style
    ;;          (unix2dos) when you want to edit it
    ;; Sample usage:
    ;; First:
    ;;   Copy file to be LoC-counted to a convenient place and convert to
    ;;   Unix-style line terminators, eg by using the following DOS commands
    ;;   copy "c:\Program Files\ACL2-2.8\Sources\Books\SE\io-utilities.lisp" c:\
    ;;   dos2unix c:\io-utilities.lisp
    ;; Then, in an ACL2 session:
    ;;   (include-book "C:/Program Files/ACL2-2.8/sources/books/SE/io-utilities")
    ;;   (set-state-ok t)
    ;;   :comp read-n-chars ; Warning! This cmd is for sessions only, not books
    ;;   (loc "c:/io-utilities.lisp" state)
    ;; Response in ACL2 session:
    ;;   (177 <state>)
    
    (defun num-noncomments (lines count)
      (if (not (consp lines))
          count
          (let* ((whitespace '(#\Space #\Newline #\Tab))
                 (leading-white-stripped (drop-set whitespace (car lines))))
            (if (and (consp leading-white-stripped)
                     (not (char-equal #\; (car leading-white-stripped))))
                (num-noncomments (cdr lines) (+ count 1))
                (num-noncomments (cdr lines) count)))))
    (defun loc-from-file-as-string (str)
      (num-noncomments (packets #\Newline (str->chrs str)) 0))
    (defun loc (file-path state)
      (mv-let (str error state) (file->string file-path state)
              (if error
                  (mv error state)
                  (mv (loc-from-file-as-string str) state))))
    
    ;;===== Example functions using file i/o =======================================
    ;;
    ;;  Warning!
    ;;    The variable "state"
    ;;      (1) cannot have any other name
    ;;      (2) can be used only in certain contexts
    ;;
    ;;  Note: You must issue the command
    ;;           (set-state-ok t)
    ;;        before invoking any function that refers to the variable state
    ;;
    ;;  Note: Directory separator in file-path string is "/", not "\"
    
    ;; (wfoo state)   ; This formula writes the file "C:/foo.wpd"
    ;;                  Well...actually...it's "C:\foo.wpd"
    ;;                  but ACL2 uses Unix conventions in path names
    
    (defun wfoo (state)
      (mv-let (error state)
              (string-list->file "C:/foo.wpd"
                                 (list "this is the first line"
                                       "this is the second line")
                                 state)
              (if error
                  (mv error state)
                  (mv "Write C:/foo.wpd succeeded" state))))
    
    ;; (rfoo state)   ; This formula reads the file "C:/foo.wpd"
    ;;                  Well...actually...it's "C:\foo.wpd"
    ;;                  but ACL2 uses Unix conventions in path names
    
    (defun formula-for-rfoo-result (str)
      (string-append "input file as string follows: " str))
    
    (defun rfoo (state)
      (mv-let (str error state) (file->string "C:/foo.wpd" state)
              (if error
                  (mv error state)
                  (mv (formula-for-rfoo-result str) state))))
    
    ;; (rwfoobar state)  ; This formula reads the file "C:/foo.wpd"
    ;;                     then writes the file "C:/bar.wpd"
    ;;                     Well...actually...it's "C:\foo.wpd" and "C:\bar.wpd"
    ;;                     but ACL2 uses Unix conventions in path names
    
    (defun rwfoobar (state)
      (mv-let (input-as-string error-open state) (file->string "C:/foo.wpd" state)
              (if error-open
                  (mv error-open state)
                  (mv-let (error-close state)
                          (string-list->file "C:/bar.wpd"
                                             (list "c:/foo.wpd follows:"
                                                   input-as-string)
                                             state)
                          (if error-close
                              (mv error-close state)
                              (mv "Success: read c:/foo.wpd, wrote c:/bar.wpd" state))))))
    
    ;; (map-chrs->str list-list-chrs)  ; This formula applies chrs->str to
    ;;                                 ;   each element in a list in which each
    ;;                                 ;   element is a list of characters
    ;;                                 ; Thus, a list of lists of characters
    ;;                                 ;   becomes a list of strings
    
    (defun map-chrs->str (list-list-chrs)
      (if (consp list-list-chrs)
          (cons (chrs->str (car list-list-chrs))
                (map-chrs->str (cdr list-list-chrs)))
          nil))
    
    ;; (your-computation str)  ; This formula converts a string to a list strings
    ;;                         ;   each of which is a substring of str filling in
    ;;                         ;   the gap between two newline-characters
    ;;                         ; In a real program, this function would do a
    ;;                         ;   more elaborate computation, to carry out
    ;;                         ;   whatever transformation you intended your
    ;;                         ;   program to do, and then it would represent the
    ;;                         ;   results of th comptutation as a list of strings
    
    (defun your-computation (str)
      (map-chrs->str (packets #\Newline (str->chrs str))))
    
    ;; (ipo f-in f-out state)  ; This formula uses the function file->string reads
    ;;                         ;   the file f-in, producing a string containing all
    ;;                         ;   the characters in the file
    ;;                         ; Then it invokes the function "your-computation"
    ;;                         ;   to transform the string to a list of strings
    ;;                         ; Finally, it writes the list of strings delivered
    ;;                         ;   by your-computation to a file named f-out,
    ;;                         ;   one string per line
    ;;                         ; USING THIS INPUT/PROCESS/OUTPUT TEMPLATE
    ;;                             Copy the defun for ipo,
    ;;                         ;   change its name to something appropriate,
    ;;                         ;   define a new function to do the computation
    ;;                         ;   you are working on (note: your the input to
    ;;                         ;   your function will be a string consisting
    ;;                         ;   of all the characters from your input file,
    ;;                         ;   and the output must be a list of strings,
    ;;                         ;   one string for each line you want in your
    ;;                         ;   output file), and, finally,
    ;;                         ;   replace the invocation of "your-computation"
    ;;                         ;   by an invoction of the function you defined
    ;;                         ; Warning! The input file f-in must be a text-file
    ;;                         ;   with Unix-style line separators
    ;;                         ;   (You can convert DOS-style files to Unix-style
    ;;                         ;   with the dos2unix program.)
    ;;                         ; Warning! The strings f-in and f-out must be
    ;;                         ;   Unix-style file-path specs, with forward slashes
    ;;                         ;   not Windows-style back slashes
    ;;                         ;   For example, "C:/yourfolder/yourfile.wpd",
    ;;                         ;            not "C:\yourfolder\yourfile.wpd"
    ;;                         ; Warning! The third parameter of ipo cannot be
    ;;                         ;   any symbol other than the symbol whose name
    ;;                         ;   is "state"
    ;;                         ; Warning! Before invoking this function from an
    ;;                         ;   ACL2 session, you must issue these commands:
    ;;                         ;   (set-state-ok t)
    ;;                         ;   :comp read-n-chars
    ;;                         ;   :comp write-all-strings
    
    (defun ipo (f-in f-out state)
      (mv-let (input-as-string error-open state) (file->string f-in state)
              (if error-open
                  (mv error-open state)
                  (mv-let (error-close state)
                          (string-list->file f-out
                                             (your-computation input-as-string)
                                             state)
                          (if error-close
                              (mv error-close state)
                              (mv (string-append "Read "
                                                 (string-append f-in
                                                                (string-append ", compute, then write " f-out)))
                                  state))))))
    ;;===== end of example functions ===============================================
    
    )
  
  (define-compound-unit/infer io-utilities@
    (import)
    (export io-utilities^)
    (link list-utilities@ LU->IU@)))